The DDS3 tape drive is just the perfect solution for small to medium businesses to store computer data on a Digital Audio Tape (DAT), or recover data from old DDS3 backups. With a capacity of 12GB native (uncompressed), 24GB compressed data on a 125 m cartridge., it offers a speed of >1.5MB/sec Native, >3MB/sec in the compressed format. The tape drive offers a DDS compatibility with its LVD SCSI (50 Pin) connection and a media consisting of 4mm DDS (DAT) Tapes.
The DDS-3 also uses PRML (Partial Response Maximum Likelihood), the PRML effectively reduces the electronic noise for a cleaner data recording.
DDS4 Tape drive is suitable for reading or writing DDS4 tapes and is usually required for recovering old DDS4 backups. It offers a capacity of 20GB Native, 40GB compressed data per tape at the speed of >3.2MB/sec Native, >6.4MB/sec compressed. Offers a compatibility of DDS, DDS-3, and 4mm DDS (DAT) Tapes Media along with a connection of LVD SCSI (50 Pin). The tape drive deliver quality data performance, availability, and storage capacity, to meet the demanding and growing storage needs of all businesses. With its user-friendly design it can be used in any storage configuration.Get a Quote
An external 70GB DLT Tape Drive.Get a Quote
The DLT 8000 (DLT 40/80) external backup tape drive is fast, reliable, and sturdily built. It offers a storage capacity of 40GB Native, 80GB Compressed Data per Tape, and a speed of 6MB/sec Native, 12MB/sec compressed. It supports a media of type IV DLT tapes, offers Ultra 160 SCSI (68 Pin) connection and is Read DLT 4000, DLT 7000 compatible. This tape drive delivers quality performance, availability, and storage capacity for all business data, and is convenient to operate with its user-friendly design.Get a Quote
A 320G external SDLT tape drive.Get a Quote
HP StorageWorks MSL 5026SL Tape Library is a large, rack mounted, SDLT tape library to suit the requirements of all business data backups. It offers 5.72 TB (2:1 compression) of storage, providing the highest capacity in its class in a compact 5U form factor, in tabletop or rack mount configurations. It is scalable up to seven units in a rack mount configuration to provide a maximum of 40.04 TB (2:1 compression) of data backup capacity. The internal robot changes tapes, enabling a continuous operation via the two internal SDLT drives.Get a Quote
The HP LTO-2 Ultrium SCSI external tape drive is considered to be one among the high performance and huge capacity StorageWorks drive available today. Designed for midrange backup solutions, it comes with a compressed storage data cartridge with capacity of 400GB, which uses LTO2 media. Additionally, it is fully read and write compatible with the 2nd gen media and drives of Ultrium.Get a Quote
An external LTO-3 tape drive.Get a Quote
Excellently designed to yield capacity, speed and performance, the IBM System Storage TS3100 LTO-3 Tape Library is suitable for small to medium businesses looking for large scale automated backups. Renting these storage tape library provides for a cost effective back up, retrieval and archive for all types of storage environments. It comes with 2 x LTO-3 internal tape drives and offers a capacity of 9.6TB Native, 19.2TB compressed data per tape. The speed is commendable -- at a rate of 80MB/sec Native, 120MB/sec compressed per drive. The tape library comes with an Ultra 160 SCSI (VHDCI) connection, is Read LTO1, LTO2 compatible, and supports the media comprising 24 x Type I SDLT tapes.Get a Quote
This external DVD-RW drive with a capacity of 4.7GB, 8.5GB in dual layer media is ideally suitable for small-scale backups. The DVDRW burner offers a good speed for writing and reading DVD disks with a fairly satisfactory CD component. The drive is powered through an USB 2.0, and it provides for IEEE-1394/Firewire connection; the external burner can connect fast to any computer through the firewire.Get a Quote
USB/IEEE-1394 (Firewire) external hard disk drive is ideal in conditions requiring a rapid movement of large amounts of data. It offers a capacity of 200+GB, and a USB 2.0, IEEE-1394/Firewire connection. The external drive has two connectors. One is to be connected to the SCSI controller cord, or previous device in the SCSI chain, and the other to be connected to the next device in the SCSI chain.Get a Quote
Don't become a statistic: use Hire Intelligence's technology-leading solution to secure your data.Get a Quote
© 2012 Hire Intelligence